English

701-901-252

Emergency call system supporting accessories

The handset can be connected to TL6 in the machine room to establish communication with the installed carstation as well as the extra stations on the car roof andlift pit.Can be connected to any SUMMIT emergency telephoneto configure them or for on-site recording of anidentification message to the call center operator.

Main features

◼︎ Analogue DTMF handset

◼︎ Configure any SUMMIT telephone ◼︎ On-site recording of identification message forcall centre

Data sheet
Function
Configuration and voice communication
Installation
Portable or fixed in machine room
Supporting model
TL6、IC2

Public Information

Download public materials without logging in.

Corporate brochure

SUMMIT Product Summary V1.0‍
More related content

TL6

Elevator emergency calling system


Only 2 wires plus supply voltage is needed for each voice station. No additional interface board is required for connecting up to 6 voice stations in car, on car roof, in car pit, machine room or on the floors.

The integrated battery backup system ensures continued operation despite a power outage. A condition test is performed on a regular basis and the unit will send an alarm if the battery needs to be replaced.
◼︎USB connection for programming
◼︎Serial RS232 connection for programming
◼︎RJ12 connection for analogue phone
◼︎2 optically isolated inputs: 10-30V, 5 mA (NO/NC)
◼︎2 relay outputs: 2A 30V DC / 0,5A 125V AC
◼︎Output for emergency light 12V (100mA)
◼︎Output for emergency siren 12V (200mA)
Elevator emergency calling system


IC2 is a simple and cheap way to get intercom between machine room and the lift car. Typical use is to comply with EN81 in hydraulic lifts where there is no acoustical connection between the lift shaft and the machine room. Also suitable or lifts with shaft heights exceeding 30 meters or in cases where an intercom is requested.
◼︎Connect existing emergency telephones
◼︎Supply voltage 12VDC or 24VDC
◼︎Call any SafeLine unit connected to the same telephoneline
◼︎Use any standard analogue handset with DTMF formachine room
◼︎Call is automatically disconnected after 5 minutes