English

LC-MV59X

Hall proximity sensor

This device is suitable for all mobile car bottom elevators that require overload signals and escalators that require energy-saving operation. It has a high cost-effectiveness and overcomes the inherent disadvantage of low sensitivity of mechanical overload switches.

Main features


◼︎ Contactless induction operation mode, without mechanical movement, directly installed in the original overload switch position without changing the elevator structure;

◼︎ Adopting high-strength induction magnets to maximize the system's anti-interference ability; ◼︎ Electrical performance meets the "IEC" standard; ◼︎ Accurate positioning, small size, and convenient installation and debugging.

Cylindrical type

Detection range

IP67-EN60529

Data sheet
Detection distance
2 ... 9mm +15%
Movement differential
15% maximum sensing distance
Detection object
Magnetic steel
Response frequency
0.2KHz
Input voltage
12 ... 24VDC
Type of output
Relay output (1 normally closed, 1 normally open)
Indicator light
Red LED (signal output)
Temperature effect
The working temperature range is -20~+60℃, which is less than 5% of the detection distance at 23℃
Voltage influence
Within the range of ± 10% change in rated voltage, the rated voltage is detected to be below 2.5%
Insulation impedance
50M Ω
Insulation strength
Insulation voltage 500V per minute
Connection method
Lead out type (standard length 1.2 meters)
Size
Φ24 × 90 mm
Multiple installation methods

Installation of elevator activity car bottom

Installation on elevator rope head board

Installation on escalators

Public Information

Download public materials without logging in.

Corporate brochure

SUMMIT Product Summary V1.0‍

Technical data

  • All
  • Manuals
  • Drawing
  • Certifications
SUMMIT Product Summary(EN)V1.0.pdf
32.8MB
CE 18PT0402003E 01.pdf
637.4KB
LC-MV59X.pdf
893.7KB
12